Supported Galaxy Note 3 Variants(codename):
* hlte/hltexx/hltespr
* hltechn
* hltekor/ktt/skt
*hltetmo
Supported Android Version:
* Android 9 (PIE)
* Android 10
Supported ROMs:
* All AOSP based ROMs
* All CAF Based ROMs
* All LineageOS Based ROMs
Major Features(Current Lolz Stable Release):
* Splashloop Proof Since V9.0 🤣
* Compiled with AOSP CLANG 10.0.1
* Systemwide WQ_POWER_EFFICIENT
- BACKPORT: WORKQUEUE From Linux 3.10
- BACKPORT: RCU From Linux 3.8
* BACKPORT: F2FS from Linux 4.12
* Custom CPU governors: Lolznappy, Elemental-X, Nightmare, Alucard, Intelliactive and zzmoove.
* Lolznappy CPU Governor as default.
(LOLZ Kernel own CPU Governor, Based on AOSP Interactive with lot Patches from Upstream and the Open Source Community, tweaked and Optimized for Balanced Usage)
* CPU Input Boost by sultanxda
* CPU Voltage Control
* Fully Disabled MPdecision
* CPU Hotplug Drivers: Bricked/MSM Mpdecision and Blu_plug(Experimental)
* CPU Underclock and Overclock: 268MHz to 2496MHz (2265MHz is the default max frequency for Balanced Usage)
* GPU Underclock and Overclock: 100MHz to 600MHz (27MHz @ Idle)(450MHz max default for Balanced Usage)
* GPU: Adreno Idler (Enabled by default)
* Boeffla Sound Control
* TCP Congestion: Westwood as default
* Screen: K-lapse v5.0 & KCAL
* Custom Schedulers: Fiops, Maple, Fifo, VR, SIOPlus, Tripndroid, ZEN
* FIOPS as default IO Scheduler
* USB/AC Fastcharge V1.3
* Underhood Optimizations, Code fixes and Tweaks
How to install?
* CLEAN KERNEL FLASH METHOD:
- Read Carefully!(you need to do this every time you flash this custom kernel)
1. Be sure you are not using any Custom Kernel.. If you are, then you need to dirty flash your ROM or just flash the stock boot.img of the ROM you are using.(You can get the boot.img of your ROM by Extracting the ROM.zip)
2. Goto TWRP then flash Magisk(Magisk zip first when you are on Android 9, If you are on Android 10 You need to flash Magisk after flashing Lolz kernel zip)(if you do not need root then skip this)
3. flash the Lolz kernel zip.
4. Reboot(just wait for it to boot)
5. Enjoy .
* DIRTY FLASH METHOD (For LAZY Users)
1. Reboot to TWRP Recovery ( I will assume that you have this Custom Recovery )
2. Flash Magisk Zip (Not needed if you have installed this on previous kernel already)
3. Flash the Lolz kernel zip
4. Reboot
5. Enjoy being dirty
* hlte/hltexx/hltespr
* hltechn
* hltekor/ktt/skt
*hltetmo
Supported Android Version:
* Android 9 (PIE)
* Android 10
Supported ROMs:
* All AOSP based ROMs
* All CAF Based ROMs
* All LineageOS Based ROMs
Major Features(Current Lolz Stable Release):
* Splashloop Proof Since V9.0 🤣
* Compiled with AOSP CLANG 10.0.1
* Systemwide WQ_POWER_EFFICIENT
- BACKPORT: WORKQUEUE From Linux 3.10
- BACKPORT: RCU From Linux 3.8
* BACKPORT: F2FS from Linux 4.12
* Custom CPU governors: Lolznappy, Elemental-X, Nightmare, Alucard, Intelliactive and zzmoove.
* Lolznappy CPU Governor as default.
(LOLZ Kernel own CPU Governor, Based on AOSP Interactive with lot Patches from Upstream and the Open Source Community, tweaked and Optimized for Balanced Usage)
* CPU Input Boost by sultanxda
* CPU Voltage Control
* Fully Disabled MPdecision
* CPU Hotplug Drivers: Bricked/MSM Mpdecision and Blu_plug(Experimental)
* CPU Underclock and Overclock: 268MHz to 2496MHz (2265MHz is the default max frequency for Balanced Usage)
* GPU Underclock and Overclock: 100MHz to 600MHz (27MHz @ Idle)(450MHz max default for Balanced Usage)
* GPU: Adreno Idler (Enabled by default)
* Boeffla Sound Control
* TCP Congestion: Westwood as default
* Screen: K-lapse v5.0 & KCAL
* Custom Schedulers: Fiops, Maple, Fifo, VR, SIOPlus, Tripndroid, ZEN
* FIOPS as default IO Scheduler
* USB/AC Fastcharge V1.3
* Underhood Optimizations, Code fixes and Tweaks
How to install?
* CLEAN KERNEL FLASH METHOD:
- Read Carefully!(you need to do this every time you flash this custom kernel)
1. Be sure you are not using any Custom Kernel.. If you are, then you need to dirty flash your ROM or just flash the stock boot.img of the ROM you are using.(You can get the boot.img of your ROM by Extracting the ROM.zip)
2. Goto TWRP then flash Magisk(Magisk zip first when you are on Android 9, If you are on Android 10 You need to flash Magisk after flashing Lolz kernel zip)(if you do not need root then skip this)
3. flash the Lolz kernel zip.
4. Reboot(just wait for it to boot)
5. Enjoy .
* DIRTY FLASH METHOD (For LAZY Users)
1. Reboot to TWRP Recovery ( I will assume that you have this Custom Recovery )
2. Flash Magisk Zip (Not needed if you have installed this on previous kernel already)
3. Flash the Lolz kernel zip
4. Reboot
5. Enjoy being dirty
.pling.
com
/p/1410846
