[root@iZ2zecj51bg87tp21z6vbqZ ~]#curl -fsSL https://tailscale.com/install.shl shInstalling Tailscale for centos 7,using method yum+ yum install yum-utils -yLoaded plugins: product-id,search-disabled-repos, subscription-manager
This system is not registered with an entitlement server. You can use subscription-manager to register
baseepel
extras
tailscale-stable
3.6 kB00:00:004.7 kB00:00:002.9 kB00:00:003.0kB 00:00:00
https://pkgs.tailscale.com/stable/centos/7/x86_64/repodata/repomd.xml:
[Errno -1]pygpgme is not working so repomd.xmlc
an not be verified for tailscale-stable
Trying other mirror.
One of the configured repositories failed(Tailscale stable)and yum doesn't have enough cached data to continue. At this point the onlysafe thing yum can do is fail. There are a few ways to work "fix" this:
Contact the upstream for therepositoryand get them to fix the problem
Reconfigure the baseurl/etc. for the repository, to point to a working2upstream. This is most often useful if you are using a newerdistribution release than is supported by the repository(and thedistribution release still workpackages for the previous
3. Run the command with the repositortemporarily disabledyum--disablerepo=tailscal
4.Disable the repository permanently, so yum won't use it by default. Yumwill then just ignore the repository until you permanently enable itagain or use-enablerepo for temporary usage :
yum-config-manager--disable tailscale-stable
0r
subscription-manager repos--disable=tailscale-stable
to be skipped, if it is unavailable.5.Configure the failing repositoryNote that yum will try to contact the repo. when it runs most commandsso will have to try and fail each time (and thus. yum will be be muchslower. If it is a very temporary problem though，this is often a nicecompromise:
yum-config-manager--setopt=tailscale-stable.skip if unavailable=true--SaVe
failure: repodata/repomd.xml from tailscale-stable: [Errno 256] No more mirrors to try.https: //pkgs.tailscale.com/stable/centos/7/x86_64/repodata/repomd.xml: [Errno -1] pygpgme is not working so repomd.xman not be verified for tailscale-stable[root@iZ2zecj51bg87tp21z6vbqZ~]#
翻译如下：
[root@iZ2zecj51bg87tp21z6vbqZ~]#卷曲-fsSLhttps://tailscale.com/install.shlsh使用方法百胜+百胜安装用于centos 7的Tailscale，安装百胜-utils-yLoaded插件：product id，search-disabled repos，subscription manager
此系统未在授权服务器上注册。您可以使用订阅管理器进行注册
baseepel
额外费用
尾秤稳定
3.6 kB00:00:004.7 kB00:0:002.9 kB00:00:003.0kB 00:00:00
https://pkgs.tailscale.com/stable/centos/7/x86_64/repodata/repomd.xml:
[Erno-1]pygpgme不工作，所以repomd.xmlc
未验证尾秤是否稳定
尝试其他镜像。
其中一个配置的存储库失败（Tailscale稳定），并且百胜没有足够的缓存数据来继续。在这一点上，百胜能做的唯一安全的事情就是失败。有几种方法可以“修复”此问题：
联系上游以获得建议，并让他们解决问题
重新配置存储库的baseurl/etc.，以指向正在工作的2上游。如果您使用的发行版版本比存储库支持的版本更新（而且发行版版本仍然是以前版本的工作包
3.使用reportortemporaly-disabledpo=tailscal运行命令
4.永久禁用存储库，所以百胜默认不会使用它。然后Yum将忽略存储库，直到您永久启用itagain或使用enablerepo进行临时使用：
yum-config-manager——禁用tailscale-stable
0r
订阅管理器repos--disable=尾标稳定
要跳过，如果不可用。5.配置失败的存储库注意，百胜将尝试联系存储库。当它运行时，大多数commandsso每次都必须尝试并失败（因此.yum会低得多。不过，如果这是一个非常暂时的问题，这通常是一个不错的折衷方案：
yum-config-manager--setopt=tailscalestable.skip if unavailable=true--SaVe
失败：来自tailscale stable的repodata/repomd.xml：[Erno 256]没有更多镜像可尝试。http://pkgs.tailscale.comtable/centos/7/x86_64/repodata/repomd.xml:[Erno-1]pygpgme不工作，因此无法验证repomd.xman是否稳定[root@iZ2zecj51bg87tp21z6vbqZ~]#

大佬们，有centos6安装tailscale教程吗？